mate this is a mammoth job for someone who hasn't done it before. you will need to support ya bike and your engine (depending how it mounted) and you will want a mate to help you lift it, it is bloody heavy, and if you drop it, you might be scrapping it. not impossible by any means. you'll have it out in a day. label ya engine mount bolts, draw a diagram and mark where they go. they always seem to be what muddles me up. good luck. when you've done it once you'll have a much better knowledge of your bike. make sure you have a haynes, they can be a savior, also sign up to a thundercat forum, any questions you have will be better asked on there than here. good luck!
