|
|
30-03-11, 12:27 PM
Im doing a service on the Blade to get her ready for France in April....
If I remember right, last time I used Castrol GPS 10/40.... can I find it again??? can I fk...
Halfrouds only has 10/30? the only 10/40 is fully synth..
where you get your oil from?
or any recommendation on other brand? I've always used Castrol....
30-03-11, 12:30 PM
I just did mine - used silkolene 10/40 semi synthetic and got it from Steve Lynehams ( http://www.stevelynhammotorcycles.co...dex.php?cid=11 ). Cost me £37 for 4lts of oil, filter and a filter wrench.
30-03-11, 01:02 PM
First thing is to find out the specification your bike manufacturer specifies. This will be in the manual and covers many other properties than just the temperature range which is whats indicated by 10/40, 20/50 etc such as the GL rating. Once you have the spec you can then source the oil manufacturer and the supplier.
I use Opie Oils and have them deliver to my door.
30-03-11, 03:33 PM
who checks their bike manual for all the oil properties and then compares with whats written on the back of the bottle??
30-03-11, 03:52 PM
I do ;DOriginally Posted by jpssantos
30-03-11, 04:42 PM
JP it's called Power1 now, GPS is the old name, more than a good enough oil for a blade.
30-03-11, 04:46 PM
^ what he said for my blade
I bought my last lot from these guys
http://www.nielsencdg.co.uk/acatalog...0W-40_Oil.html
30-03-11, 05:14 PM
Busters on Ebay are doing 4 litres & filter for circa £29, for a zx9 anyway, have a gander there might be Homda filter packages too.
30-03-11, 06:28 PM
Haaaa!! So they changed the name! that's why I couldnt find it!...... but that one from the link is fully synth? I want semi.... do they still do the semi in 10/40?
30-03-11, 06:31 PM
found it on that website!
| « Previous Thread | Next Thread » |
