-
Front Sprocket
Hi,
wondering if anybody in the Melksham area may be able to assist with lending me a bloody big socket to get front sprocket off please?
Looking like a 32mm
I have 3/8'' drive
Replacing chain and sprokets on my V-Strom (K3)
If not, I'll go buy one from someplace, but thought I might be cheeky and ask here first ;)
-
Re: Front Sprocket
I will have the size but no where near melksham - unless someone from swindon is going anywhere that way or a meet
-
Re: Front Sprocket
Yep I have one, but am in Swindon somewhere. Still can borrow it if need be. 8-)
-
Re: Front Sprocket
nice1 , may well put bike back together for now and come over tomorrow morning. Unless I can sort something out today.
-
Re: Front Sprocket
It might be worth you taking the bike to a dealer or garage where they can get an airgun onto it - especially if it's the first time that the sprocket will be removed since new - they're put on fecking tight at the factory and sometimes even a breaker bar on a 1/2" drive socket and a smack with a lump hammer won't shift them >:( - an airgun will whizz it straight off - get it loosened, then tighten it sufficiently to get you back home to do the work :) [smiley=thumbsup.gif]
-
Re: Front Sprocket
-
Re: Front Sprocket
I have a friend bringing a socket and breaker bar around this after noon.
Hopefuly this should be enough, the service history I have shows it was replaced some 10K miles ago.
Thanks for you offers, they are much appreciated, nice to knpw there's some good people about [smiley=thumbsup.gif]
-
Re: Front Sprocket
hehe,
We couldn't budge the nut on sprocket.
But it doesn't look to that worn.
My dproblem now is the chain link.
It's the solid pin type, needs a riveting device to fix this link into place.
Would anyone have such a device?
-
Re: Front Sprocket
Nutz4bikes in Trowbridge, great chaps.
Tool for the chain riveting, £10 an hour.
All sorted now
-
Re: Front Sprocket
Nice one, glad you got it sorted [smiley=thumbsup.gif]