Exhaust recommendations please

Ah back to the topic of thread...exhaust!

Richie I will let you know..still looking and doing bit of research but one thing is for sure the original is going! (sorry Jon W!)

roxy [smiley=thumbsup.gif]

Quote:

---

Originally Posted by roxychick

Ah back to the topic of thread...exhaust!

Richie I will let you know..still looking and doing bit of research but one thing is for sure the original is going! (sorry Jon W!)

roxy [smiley=thumbsup.gif]

---

well as you never answered my question for what you are looking for from the exhaust of course we'll loosely go off topic! So...... What do you want looks, performance, sound etc etc blah blah blah What budget do you have? Lots of things you didn't tell us (along with the bike someone else did!)

Quote:

---

Originally Posted by roxychick

I am not some crazy lunatic who constantly rides around by the seat of my pants at ridiculous speeds. I still class myself as a newbie, I will always be learning, practicing and improving my skills but thats not the issue here..all I asked for was some advice on which exhausts are better because the one that is on the bike is horrid IMO...not whether I should spend my money on motorcycle training.

Surely there is nothing wrong with me wanting my bike to look pretty?? after all I paid for it therefore I want it to look nice...it's all personal preference. It's my money and if I chose to spend it on a new exhaust I will but thanks for the advice.

roxy

---

apologies - My mistake you did say you wanted a pretty looking can :-[ Only you can decide that then - get looking at places like demon tweeks where they have a selection online to view or look at R6 forum and see what pretty exhausts they have [smiley=thumbsup.gif]

Quote:

---

Originally Posted by matty999

i would get termignoni (but i am bias).

They are something a bit different and sound amazing! [smiley=thumbsup.gif]

http://www.youtube.com/watch?v=I5JSLBjVljs

---

Here that Hunting sound & its even got a PC111 perhaps a little more fine tuning. Gotta admit they d make a nice popping sound on the down acceleration ... [smiley=2vrolijk_08.gif]

All I'd say Roxy is don't go for cheap just cos it looks good. I once fitted an ART can to a Thundercat. Ran like a bag of crap with a massive flat spot. Too bleeding noisey too. I'd always go for an established company that makes race pipes, not loud pipes. If you look at the cans the British Supersport boys use, you can't go far wrong. My faves are Akropovic, Yoshi, Micron. All proper race pipes (which improves response and power). [smiley=thumbsup.gif]

What model R6 is this Rox?

I saw someone mention a 07 model but wasn't confirmed.

Where's the piccy's eh?

http://i119.photobucket.com/albums/o...ff/kitchen.jpg

;D ;D

Quote:

---

Originally Posted by Mark_Able

All I'd say Roxy is don't go for cheap just cos it looks good. I once fitted an ART can to a Thundercat. Ran like a bag of crap with a massive flat spot. Too bleeding noisey too. I'd always go for an established company that makes race pipes, not loud pipes. If you look at the cans the British Supersport boys use, you can't go far wrong. My faves are Akropovic, Yoshi, Micron. All proper race pipes (which improves response and power). [smiley=thumbsup.gif]

---

May struggle with Micron unless going 2nd hand as they went bust - GW's bought thier stock and checked and none remaining. Plus practical isn't always the prettiest ;)

As for more expensive being better quality.....check out the can OF just sold! cracked Akro and I know tim looks after his stuff :-/

As I said before go for what you like. Also check out the scorpion street range and lazer did some nice ones for the R6 iirc [smiley=thumbsup.gif]

Quote:

---

Originally Posted by ninja_richie

What model R6 is this Rox?

I saw someone mention a 07 model but wasn't confirmed.

Where's the piccy's eh?

---

It's on an 07 plate, will put piccy's on when new can is on! ;)

roxy :)

Quote:

---

Originally Posted by Davey

[quote author=Mark_Able link=1263575617/30#34 date=1264020077]All I'd say Roxy is don't go for cheap just cos it looks good. I once fitted an ART can to a Thundercat. Ran like a bag of crap with a massive flat spot. Too bleeding noisey too. I'd always go for an established company that makes race pipes, not loud pipes. If you look at the cans the British Supersport boys use, you can't go far wrong. My faves are Akropovic, Yoshi, Micron. All proper race pipes (which improves response and power). [smiley=thumbsup.gif]

---

May struggle with Micron unless going 2nd hand as they went bust - GW's bought thier stock and checked and none remaining. Plus practical isn't always the prettiest ;)

As for more expensive being better quality.....check out the can OF just sold! cracked Akro and I know tim looks after his stuff :-/

As I said before go for what you like. Also check out the scorpion street range and lazer did some nice ones for the R6 iirc [smiley=thumbsup.gif][/quote]

Just hairline stress fracture, guy who bought (TM) Had the bracket welded for few euros...

This post is just got a tad boring keeping us all in suspenders ... seen one seen them all. :D :D

Better be a nice bit of kit worth the wait :-* :-*

8-)