Jinlun 125-11

well done to JayDee and Scotty - our very own fonts of all knowledge!!

And welcome to WB Rampa

Welcome from the harp & crown bikers [smiley=thumbsup.gif]

http://www.onlineconversion.com/pressure.htm

welcome

No idea, but hello and welcome...

Welcome, I had a Jinlun as a 125 wasn't a bad bke at all. There is a Jinlun owners forum which is very useful. Google it, I can't remember the address.

Hi welcome to Wiltshire Bikers

Yo Rampa!! welcome to wiltshire bikers! [smiley=thumbsup.gif]

Hello & welcome :)

Quote:

---

Originally Posted by Scotty

Hi Rampa, nice introduction.... there is a technical slate for that kind of question if you need to ask in the future.
Re. your tyre pressures, the Chinese won't have a clue what psi is, it's only those who live in the stone age like us and the septics who insist on using old outdated units like this.
The modern world talk about pressure in metric units. Pa = Pascal (named after a French physicist) and a Pascal is another name for the force of 1 Newton per square metre (N/m²) The k bit stands for kilo, or thousand (1 x 10³) as in kilometre (1000 metres) kilogram (1000 grams) - get it?
A pressure of 100kPa is 100,000N/m² and is known as 1 bar, and is equivalent to near enough 14.5psi, so as JayDee says, your front tyre pressure is 200kPa or 2 bar (2 x 14.5) = 29psi, and your rear is 2.25 bar which equates to 32.65psi, or 33 near as dammit.

Here endeth the lesson, welcome to Chinese manuals [smiley=thumbsup.gif]

---

Quality .. learn something new each.. Welcome to WB !!