Been tinkering with the bike again

[Nooj]

Made myself some new rear lights. I did a small run of LED lights for the Falco forums a few years ago and have finally given in to the nagging from a fellow Falco chum and have made some more, slightly updated design this time round.

http://i86.photobucket.com/albums/k117/TheOriginalNooj/My%20Bikes/Mods/Tail.jpg

http://i86.photobucket.com/albums/k117/TheOriginalNooj/My%20Bikes/Mods/TailBrake.jpg

http://i86.photobucket.com/albums/k117/TheOriginalNooj/My%20Bikes/Mods/TailTurn.jpg

http://i86.photobucket.com/albums/k117/TheOriginalNooj/My%20Bikes/Mods/TailTurnBrake.jpg

http://i86.photobucket.com/albums/k117/TheOriginalNooj/My%20Bikes/Mods/45DegView.jpg

[Jon_W]

Very cool.

8-)

[Dan505]

they look very spesh, they legal for the MOT?

[Nooj]

They should pass an MoT, the colour and flash rate is correct and they are either side of the bike, so I don't see a problem. Need to get it tested soon so will find out then:-s

[Dan505]

8-)

[BB]

Didn't someone post on here recently that their integral indicators had failed the MOT? :-?

BB

[Paul_H]

Didn't someone post on here recently that their integral indicators had failed the MOT? :-?

BB


It's some MOT Testers pet hate

[Dan505]

It was posted before which is why i asked :)

[Nooj]

I saw the other thread after posting this up :P

[Jon_W]

You may be ok. Will be interesting to see.

[Kevinb]

Didn't someone post on here recently that their integral indicators had failed the MOT? :-?

BB

I looked at them for the MT but I think you are right as there has to be a minimum distance between the indicator lights

[Nooj]

No minimum distance, as long as they're either side of the bike. Follow Gaz's link on the other post, all the pass criteria are listed there.

[Nooj]

Here you go, this is the link Gaz posted: http://www.ukmot.com/bike_1-5.asp#Text_top

[voodoo]

very nice 8-)

[goz1960]

Didn't someone post on here recently that their integral indicators had failed the MOT? :-?

BB
Im sure they did.