Notices
 

Thread: Setting up 34mm carb do i rejet black spark plug

Results 1 to 10 of 37

Hybrid View

  1.  
    #1
    Newbie
    Join Date
    Jan 2012
    Posts
    43
    found this topic on ww.125ccsportsbikes.com ,
    http://www.125ccsportsbikes.com/foru...&#entry1479121
    looks like a good base setting to me,there's alot of information to be found on there
     
     

  2.  
    #2
    Active Member Birdylegs's Avatar
    Join Date
    May 2013
    Posts
    288
    Quote Originally Posted by db View Post
    found this topic on ww.125ccsportsbikes.com ,
    http://www.125ccsportsbikes.com/foru...&#entry1479121
    looks like a good base setting to me,there's alot of information to be found on there
    He gets top end i only get 5000 rpm just have to use gears to get 40mph tops but im a member of there form ty
    A good ride is any ride you can walk away from, a GREAT ride is if you can use the bike afterward.”
     
     

  3.  
    #3
    Newbie
    Join Date
    Jan 2012
    Posts
    43
    but it gives you a good base setting for the needle and mains,the needle will clean the midrange up
     
     

  4.  
    #4
    Active Member Birdylegs's Avatar
    Join Date
    May 2013
    Posts
    288
    It would pull of but i had to pull in clutch and feed it if i over rev it stalled i road my lf 125 for a year without stalling but this bike could cut out when clutch was out and power on. Tighten clutch cable ran a leaner mixture that helped but uninspected stalls could have killed me on crossroads bike also droped speed 5th at 80 mph then in 6th droped down to 60mph never pulled up when in 6th at 60 very fast hoped new carb would stop me putting every one at risk behind me. I do drive slowly and safely but would also like to pass trucks not have lines of them build up behind me blasting past my 55mph on a419 on way to mums
    A good ride is any ride you can walk away from, a GREAT ride is if you can use the bike afterward.”
     
     

  5.  
    #5
    Active Member
    Join Date
    Jul 2013
    Location
    Swindon
    Posts
    224
    feck sake don't ride the bike then, sounds like a death trap
     
     

  6.  
    #6
    Active Member Birdylegs's Avatar
    Join Date
    May 2013
    Posts
    288
    Quote Originally Posted by Brizzer View Post
    feck sake don't ride the bike then, sounds like a death trap
    Wizzed past a biker to have engine cut out on me in i switched to res. Fuel but slowed down a lot he was thinking same thing.
    A good ride is any ride you can walk away from, a GREAT ride is if you can use the bike afterward.”
     
     

  7.  
    #7
    Active Member Birdylegs's Avatar
    Join Date
    May 2013
    Posts
    288
    Quote Originally Posted by Brizzer View Post
    feck sake don't ride the bike then, sounds like a death trap
    Iv been getting v power fuel from shell ever sence you told me to thats helped exept the lorry with no brake lights that stoped infront of me and the fact my brake pads was reduced to metal a mounth after getting a machanic to look at them and as it aug he could't work on it till sep as he orders parts from them im lucky to be alive with pro help id dredd to own a diary (my girlfreind needs meds ten tablets a day i needed transport to bring her stuff when she gets kept in over night or i have to go pill chasing my bike has saved her life ) mine gets pushed of road by cars over takeing then when they see theres no room as on coming car they just switch lanes and push me off road even a amblance tryed it a seat over taked a jag behind then jag over powered had to brake hard and nearly drove strate in to back of it in need a go pro cam to recored the accidents that nearly happen i belong in muppet form lol
    Last edited by Birdylegs; 29-08-13 at 11:00 PM.
    A good ride is any ride you can walk away from, a GREAT ride is if you can use the bike afterward.”
     
     

  8.  
    #8
    Active Member Birdylegs's Avatar
    Join Date
    May 2013
    Posts
    288
    Needile on top clip 150 jet fitted still black plug ill have to keep reading links about clip on needle rasing and lowering fitting new manifold might have broke a reed as it never went past 8000 rpm when i drove it. Even when i worked in a work shop boss said he'd take car to someone alse to fix as of problems so booked it in tomorow see what they say.Thanks for help sorry its not much use to anyone alse but iv got a lot more expearence now working on my bike better will come later.
    A good ride is any ride you can walk away from, a GREAT ride is if you can use the bike afterward.”
     
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •