Notices
 

Thread: Things to Avoid - Cheap Fairing Bolts

Results 1 to 7 of 7
  1. Things to Avoid - Cheap Fairing Bolts 
    #1
    Platinum Member WR6133's Avatar
    Join Date
    Jul 2013
    Location
    Tidworth
    Posts
    1,162
    Thought this may be a useful FYI.

    eBay/Taobao is full of very reasonably priced anodised fairing bolt sets.

    These were fitted by myself about 9 months ago

    IMG_20181230_092404

    Quality is utter gash, the heads chew apart as soon as you try to remove them. Then when trying to drill out the heads snap off meaning alot of drill and stud extractor action to remove the remains. It's just taken me 3 hours to remove the fairings from my GSXR due to having to drill out every single bolt and then extract the remnants.

    Don't be tempted by the price of these cheap sets they really are utter crap.
     
     

  2.  
    #2
    Administrator BB's Avatar
    Join Date
    Mar 2006
    Location
    West Wilts
    Posts
    10,356
    Sometimes cheap is dear in the long run. better luck with replacements
    We could learn a lot from crayons; some are sharp, some are pretty, some are dull, while others bright, some have weird names, but they all have learned to live together in the same box.”
     
     

  3.  
    #3
    Senior Member
    Join Date
    Jun 2016
    Posts
    595
    A good lesson, i always think there is a reason they are cheap. At least you have got them out, quality replacements on the list then. Good luck.
     
     

  4.  
    #4
    Diamond Member Wes's Avatar
    Join Date
    Sep 2011
    Location
    Bristol
    Posts
    2,908
    Good work for getting them out! Ive used alum dust caps before and had a nightmare removing them. Best way ive found is to apply grease to the threads before fitting.
     
     

  5.  
    #5
    Diamond Member Scotty's Avatar
    Join Date
    Jan 2009
    Location
    Fawley, New Forest
    Posts
    2,743
    A tiny smear of Copaslip on the threads of aluminium fasteners saves a lot of aggro - same goes for any small-threaded fastener really. NEVER use thread-lock on aluminium fasteners.
    Has the bike in question been ridden through winter and seen salt? That won’t have helped...

    TOP TIP: fairing fasteners are usually countersunk or button head screws. These have relatively small hex sockets in relation to the thread size (ie. M6 threads have only a 4mm hex, M5 have 3mm). When fitting or removing them, always use a good really hard hex bit on a ratchet or speed brace, and ensure that it’s straight and fully engaged in the socket of the fastener. If it misaligns or jumps out it will damage the socket. Hex (Allen) keys are made from softer metal and the ends can become damaged or worn, which increases the chance of rounding out the socket on the screw. Similarly, don’t use the ball end on a hex key to undo a countersunk or button head screw - recipe for a rounded socket every time. Fine to use the ball to spin the screw out once it’s loose, but don’t use it to crack off a tightened screw (or to tighten one up!)

    This isn’t stuff that I’ve read by the way, they’ve all been lessons learned the hard way (followed invariably by perfecting the art of removing the fastener in question with a hammer and small chisel, definitely NOT a task I enjoy having to do...)

    Happy New Year everyone.
    Racing is life, anything before or after is just waiting.
    Steve McQueen
     
     

  6.  
    #6
    Diamond Member Scotty's Avatar
    Join Date
    Jan 2009
    Location
    Fawley, New Forest
    Posts
    2,743
    Quote Originally Posted by Dazr View Post
    A good lesson, i always think there is a reason they are cheap. At least you have got them out, quality replacements on the list then. Good luck.
    Me again....
    The old proverb “buy cheap, buy twice” comes to mind. I’d suggest that the OP gets replacement fasteners from somewhere like Pro Bolt - more expensive than FleaBay, but what’s the cost of three hours of time and frustration? I’d also recommend avoiding aluminium fasteners (anodised tat is just SOOO mid-90s doncha know?) - get stainless or plated steel and use that smear of Copaslip on the threads.
    Racing is life, anything before or after is just waiting.
    Steve McQueen
     
     

  7.  
    #7
    Platinum Member WR6133's Avatar
    Join Date
    Jul 2013
    Location
    Tidworth
    Posts
    1,162
    Definitley lesson learned.

    The bolts had a smear of copperslip on them. They hadn't really got properly (corroded) stuck, the metal was so soft just under normal loosening the heads chewed out. I was playing around with the box of the things I have earlier and found you can actually snap the head off the bolt just between the thumb and finger of one hand, it's almost like they were made in 2 parts and just glued together!
     
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •