http://vid1353.photobucket.com/album...psv9sdymnc.mp4
Got a whirring sound coming from my engine (zx9r B4)
Got a few ideas of what it could be but I've no idea where to start with actual diagnosing. Anyone got any ideas as to what it could be?
|
http://vid1353.photobucket.com/album...psv9sdymnc.mp4
Got a whirring sound coming from my engine (zx9r B4)
Got a few ideas of what it could be but I've no idea where to start with actual diagnosing. Anyone got any ideas as to what it could be?
Does it go away when you pull the clutch lever in and rev?
Ok it's probably not the transmission/clutch then, how about the stator/Gene, i'd whip off the cover and have a look in there for any signs. Make sure you order up a new gasket or have the ability to make one, before you do. Also if you haven't already http://www.zx-9r.net/phpBB2/index.php i used to have a C2, and that place a mine of info and experience.
Last edited by Mitch9128; 04-04-16 at 04:59 PM.
water pump bearing?
Still haven't got to the bottom of this. Had the alternator off and couldn't see anything obvious but I'm not 100% sure what I'm looking for.
Had all the fairing off and put a metal rod to the engine in various places to try and pin down the noise, still no closer!
as always, without hearing ourselves its difficult for any of us to diagnose.
firstly I will say I have known Z motors be noisy, its mainly from the clutch area. seemed to be a design problem. try to hear with the fller cap off if its louder, oil may get thrown out.
secondly, as a tip. without a stethoscope, get a long screw driver and put the blade on different NON MOVING parts of the engine, put the handle against your ear. it helps pick up noises from different parts of the engine.
just re read post, did you put metal rod to your ear? screwdrivers are softer!!
still thinking waterpump impeller bearing or alternator.
Last edited by wheelers; 20-05-16 at 07:30 PM.
Hi mate,
It is noisy, particularly as the alternator chain needs tightening, but this noise came on suddenly whilst riding. I know the various noises the bike makes and this definitely isn't one of them!
Good idea with the filler cap - hadn't thought of that one.
Yeah - screwdriver didn't occur to me. The ratchet extension I had nearby worked well enough I tried that trick on the water pump cover as you suggested (and the alternator) and couldn't hear anything out of the ordinary.
Cheers!
« Previous Thread | Next Thread » |