Notices
 

Thread: Endless Chain ( and Sprockets )

Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. Endless Chain ( and Sprockets ) 
    #1
    Diamond Member DC's Avatar
    Join Date
    Jul 2011
    Location
    Earth
    Posts
    2,868
    Will be replacing the chain and sprockets on the bike soon and have an endless chain ( no soft or master link ) , and as far as the Haynes for my bike is concerned it's done by removing the swing arm ............. Feck that !!! I've had a bit of a look around and some sources say that any pin on any link can be pushed out using a cutting and riveting tool and I've seen elsewhere a guy grinding off the pin heads on one link and then prying the plate off to remove the link . Any thoughts ???
     
     

  2.  
    #2
    Diamond Member Wes's Avatar
    Join Date
    Sep 2011
    Location
    Bristol
    Posts
    2,908
    If you are just binning the chain, just cut it off with an angle grinder or bolt croppers, don't forget to loosen the front sprocket retaining bolt before you do tho as it can be a pain to get off once the chain is removed.
     
     

  3.  
    #3
    Platinum Member Trev's Avatar
    Join Date
    Aug 2011
    Location
    nr Ringwood, Hants
    Posts
    1,398
    A Dremel like tool will let you grind the heads of the rivets down enough to gently tap a small chisel in and remove the side plate. If you are fitting a new chain with a rivet link then you will probably need a tool to turn head over properly, I've had people tell me they've done it without but wouldn't be my preference. Depends what bike you are fitting the chain too, my own rule of thumb is anything under 50 bhp I'm happy using a split link, bit arbitary I know but never had one let go or heard of anyone who has - any thoughts/expereience out there on this from others?
     
     

  4.  
    #4
    Platinum Member WR6133's Avatar
    Join Date
    Jul 2013
    Location
    Tidworth
    Posts
    1,162
    I've used a cheap riveting tool to remove links. It takes a bit of brute force and cursing. You can make it a lot easier if you file the head of the pin down a bit.

    As Wes said if you are throwing the chain away after just cut it.
     
     

  5.  
    #5
    Diamond Member Wes's Avatar
    Join Date
    Sep 2011
    Location
    Bristol
    Posts
    2,908
    I've got a chain tool if you want to borrow it mate
     
     

  6.  
    #6
    Diamond Member DC's Avatar
    Join Date
    Jul 2011
    Location
    Earth
    Posts
    2,868
    Thanks for the input chaps , planning to bin the chain so will probably cut it off or grind down the pins and pry the plate off .



    Quote Originally Posted by Wes View Post
    I've got a chain tool if you want to borrow it mate
    Just getting the van through the MOT Wes , So shortly , when I've sourced a chain and sprockets I might take you up on the offer of the chain tool as I'm planning on replacing with a master link chain .

    Is it one of these ???
     
     

  7.  
    #7
    Diamond Member Wes's Avatar
    Join Date
    Sep 2011
    Location
    Bristol
    Posts
    2,908
    similar mate, does the job of removal as well as sorting the new links out
     
     

  8.  
    #8
    Diamond Member DC's Avatar
    Join Date
    Jul 2011
    Location
    Earth
    Posts
    2,868
    Quote Originally Posted by Wes View Post
    similar mate, does the job of removal as well as sorting the new links out
    Nice one , if you come to the Remembrance Ride do you fancy bringing it along ? I'll be there weather permitting .
     
     

  9.  
    #9
    Diamond Member Wes's Avatar
    Join Date
    Sep 2011
    Location
    Bristol
    Posts
    2,908
    yep no probs
     
     

  10.  
    #10
    Chatterbox Jon_W's Avatar
    Join Date
    Sep 2009
    Location
    Loacation Loaction
    Posts
    5,133
    Good quality heavy duty chain tool will break the rivets.
    "there's no aspect, no facet, no moment in life that can't be improved with pizza"

     
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •