Notices
 

Thread: Any one good with electrics

Results 1 to 8 of 8
  1. Any one good with electrics 
    #1
    Platinum Member jack930's Avatar
    Join Date
    Oct 2008
    Location
    Westbury
    Posts
    1,294
    I got a Datatool system 3 on the bike, and its a pain. giving me some probs, however im no good with electrics,, any one willing to offer me a hand removing it.. willing to travel just to get rid of the DAM THING lol PLEASE HELP!
    Last edited by jack930; 04-10-13 at 06:14 PM.
    There are 2 new posts since your last visit. (You have read 3 of these posts.)
     
     

  2.  
    #2
    Active Member
    Join Date
    Jul 2013
    Location
    Swindon
    Posts
    224
    have a search on Google and it tells you what wires to cut to bypass it, I have 1 on my bike and its fine once you get used to it, what's your problem with it ?
     
     

  3.  
    #3
    Active Member Birdylegs's Avatar
    Join Date
    May 2013
    Posts
    288
    Mines been disconnected fuse and earth are off but being hard wired in I might need a new loom to clean it up.
    A good ride is any ride you can walk away from, a GREAT ride is if you can use the bike afterward.”
     
     

  4.  
    #4
    Active Member
    Join Date
    May 2013
    Location
    Swindon, United Kingdom
    Posts
    175
    Why don't you have a chat with TWS, he has rewired my Trike, twice, I had a fuel fire, but we don't talk about that .
    He does all of 'r lot' with electrical problems.
    Have a chat with him and in some cases he can even sort it on the phone.
    You can get hold of him on 01285 238419 or. 07748572826. His name is TICH
    If he doesn't answer leave a message, he's always up to his elbows in electricals.....
    Address :- Unit 10, Lakeside Business Park, South Cerney, Glos. GL7 5XL
    Last edited by Annie; 05-09-16 at 06:39 PM.
     
     

  5.  
    #5
    Platinum Member jack930's Avatar
    Join Date
    Oct 2008
    Location
    Westbury
    Posts
    1,294
    The prob ,, random alarms, i just wont it removed plus batt drain, i have no power in the garage

    Cheers Annie, ill try him tomoz.
    There are 2 new posts since your last visit. (You have read 3 of these posts.)
     
     

  6.  
    #6
    Senior Member
    Join Date
    Aug 2012
    Location
    bromham and melksham
    Posts
    596
    tich isn't home until sunday, celebrating his 50th in the home land (Scotland), we are booked in for Monday for a job and Tuesday to Thursday he is in Ashton Keynes wiring a Rolls Royce , so a bit busy this week.
     
     

  7.  
    #7
    Diamond Member Dan505's Avatar
    Join Date
    Mar 2012
    Location
    Wiltshire
    Posts
    2,064
    Disconnect battery, find alarm and trace each wire back to main loom, where it meets loom disconnect/cut and repatch main loom wires (bridge the gaps where the alarm wires were) and loom/bike should be back to original status. Or check alarm internal battery is sound and no water ingress as had this problem on my impreza with played havoc with the alarms ECU. Am in Swindon if you still need someone to take a (amatuer) eye over the setup
     
     

  8.  
    #8
    Platinum Member jack930's Avatar
    Join Date
    Oct 2008
    Location
    Westbury
    Posts
    1,294
    Cheers Dan,, would be good to get it done tomoz, if ya feel up to it. two heads are better than one i guess.. ill pm you my No. giz a shout if it ok
    There are 2 new posts since your last visit. (You have read 3 of these posts.)
     
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •