My 2005 R6 will not start, the thing I have noticed is it does not seem to make the priming noise when you first turn the key.
|
My 2005 R6 will not start, the thing I have noticed is it does not seem to make the priming noise when you first turn the key.
does it try to start ? if so it could be your fuel pump not working
The throttle position sensor will might need to be reset/repaired ?? http://www.r6live.com/r6-how-guides/...on-sensor.html
Do you have a alarm good battry more info is needed (for me to look up on net and copy and paste) lol but not at your bike......heres a you tube vid just read comments see if that helps
http://m.youtube.com/watch?v=Z0RxIYq...%3DZ0RxIYqL8aQ
Last edited by Birdylegs; 30-08-13 at 02:02 AM. Reason: well i cant do everything right first time can i
Re: R6 99 how to test fuel pump????You hook up the power and ground to the*fuel*pump*and it should run, continuously as long as it has power and ground. If fuel flows, it's good. If it runs without your supplied power and ground, you've got a short somewhere. Not sure if I understand correctly, but hopefully that helps some (got this from a form too could be dangers) sorry its for A 99 yours is 06 and cant undo or spell delite
Last edited by Birdylegs; 30-08-13 at 01:53 AM.
Fuel pump is where i'd start. You'll need to get a volt meter on the pump and see if it gets a signal. If it does then the pump is faulty, if not then the fault is elsewhere.
Are all the cut off switches ok?
This is when you wish you were a bit more practicable, im not. Hoe do I test the fuel pump?
I dont think there is power supply at the pump?????
Have you checked the fuses? Do you have lights / indicators?
Yes the only thing that does not seem to have power is the fuel pump?
« Previous Thread | Next Thread » |