Replacing front discs today snapped two bolts taking the old ones off > :'(is there a company that can put helicoils in,around the Trowbridge Melksham ares and roughly how much it would be approx.Sooner the better.
|
Replacing front discs today snapped two bolts taking the old ones off > :'(is there a company that can put helicoils in,around the Trowbridge Melksham ares and roughly how much it would be approx.Sooner the better.
Lightning Services, Hilperton Marsh Farm.
http://www.motorcyclesbath.co.uk/#/e...ing/4545267141
Probably closed until Tuesday, though.......
Did they snap off flush, flat & level or slanted? Helicoils are easy enough to fit, getting the old bolt out is the hard bit... should be easy enough with an easy-out now that the head is gone & the tension is off the threads?
No they snapped about 2mm inside the thread,ill try Lightning Services,i think being bolts for holding the disc to the wheel i think the problem is Loctite being on the thread plus rubbish metal the bolts are made of.
A great shop, highly recommended 8-)Originally Posted by alanTDM
Alan
Might be worth asking in GM Stevens aswell As they have a machine shop on site, they may well do something up there :-/
I did phone them but they said they couldn't do it which i thought was a bit strange seeing as they have got a machine shopOriginally Posted by silly_simon
They do mouldings and small components, so no set up for maintenance.
What size thread is it??
The size is M8 in the PDF Service manual i got,Paid £10.72 for 12 of them at Fowlers.Originally Posted by Jon_W
I drilled down the centre of one but still wont budge >
When I had the exhuast studs that needed drilling out I got hold of a gent in Calne that came out to me and did the work, he was great name of Mark Dunsmore on 07725 665324
« Previous Thread | Next Thread » |