Notices
 

Thread: 2006 GSXR-750 Strip and Rebuild (now piccys)

Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 35
  1. Re: (ready for lots HELP!! questions) now piccys 
    #11
    Platinum Member
    Join Date
    Mar 2011
    Posts
    1,091
    hehe xD nice dog though ^^
     
     

  2. Re: (ready for lots HELP!! questions) now piccys 
    #12
    Platinum Member
    Join Date
    Nov 2010
    Location
    Trowvegas
    Posts
    1,387
    I wouldnt crate the dog - he might get a little unhappy
    - he's a big boy ( I wouldn't want to upset him )
     
     

  3. Re: (ready for lots HELP!! questions) now piccys 
    #13
    Senior Member
    Join Date
    May 2010
    Posts
    835
    all body work off.........both brakes off .....gear shift assembly off. gotta drain coolant ...new rad me thinks its proper beaten up.

    then gotta rig sommmat up to get her off floor for swingarm removal

     
     

  4. Re: (ready for lots HELP!! questions) now piccys 
    #14
    Platinum Member
    Join Date
    Mar 2011
    Posts
    1,172
    Swingarm out last methinks! Lay the frame etc on its side on your lawn - be prepared for a fight with the swingarm bolt...

    Use a suitable soft drift (Thor hammer, copper, plastic, wood etc) to avoid battering the bolt end threads.
     
     

  5. Re: (ready for lots HELP!! questions) now piccys 
    #15
    Senior Member
    Join Date
    May 2010
    Posts
    835
    Quote Originally Posted by 470four
    Swingarm out last methinks! Lay the frame etc on its side on your lawn - be prepared for a fight with the swingarm bolt...

    Use a suitable soft drift (Thor hammer, copper, plastic, wood etc) to avoid battering the bolt end threads.
    cheers
     
     

  6. Re: (ready for lots HELP!! questions) now piccys 
    #16
    Platinum Member
    Join Date
    Mar 2011
    Posts
    1,172
    Try to presoak all nuts/bolts that look a bit manky with wd40, will put up less of a fight then...

    Sounds like its going good anyways!
     
     

  7. Re: (ready for lots HELP!! questions) now piccys 
    #17
    Senior Member
    Join Date
    May 2010
    Posts
    835
    only had 2 bolts play up so far .....bit of heat n penertrating oil and bingo.
    everything i take off .....goes into a little tub marked with what it came from

    IE gear assembly......rear brake etc
     
     

  8. Re: (ready for lots HELP!! questions) now piccys 
    #18
    Senior Member
    Join Date
    May 2010
    Posts
    835
    http://www.facebook.com/media/set/?s...p;l=8273267a61
    pic album will update as going along
     
     

  9. Re: 2006 GSXR-750 Strip and Rebuild (now piccys) 
    #19
    Senior Member
    Join Date
    May 2010
    Posts
    835
    my strip came to a hault due to work commitments.

    today i finally dropped the engine out removed front forks tomorrow i will remove rear shock split frame and swing arm.

    then its off to powder coating.

    had a VERY stubborn engine mount bolt.....rounded allen key head off...screwed a pair of footprints shifting it.....it fonally gave up 45mins later with a pair of stilsons on it.

    engine is going off to mates to have valves checked. from what i can see i have 1 very black looking valve :-/

    gotta purchase some new bolts etc etc new bearings etc etc then i can start re-building.







     
     

  10. Re: 2006 GSXR-750 Strip and Rebuild (now piccys) 
    #20
    Chatterbox Jon_W's Avatar
    Join Date
    Sep 2009
    Location
    Loacation Loaction
    Posts
    5,133
    Nice one!!

    Keep up the good work.
    "there's no aspect, no facet, no moment in life that can't be improved with pizza"

     
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •