Notices
 

Thread: 2006 GSXR-750 Strip and Rebuild (now piccys)

Page 1 of 4 123 ... LastLast
Results 1 to 10 of 35
  1. 2006 GSXR-750 Strip and Rebuild (now piccys) 
    #1
    Senior Member
    Join Date
    May 2010
    Posts
    835
    i have just taken my bike to a m8s garage where it will be stripped down ...all powder coated frame wheels etc etc.

    after nearly 30k of english roads she looks worse for wear.

    lots of new shinys

    forks having rebuild..brake overhaul..new rear shock. im hoping to have her on the road again beginging of march

    im warn you now ill be bugging you lot for help along the way ;D

    so thank you for your patience and advice in advance

    i will start a thread for pics along the way

    where is the best place to start stipping? or does it make no difference.

    any tips? secrets that will make life easier??

    cheers

    Dan.
     
     

  2. Re: let it begin (ready for lots HELP!! questions) 
    #2
    Diamond Member
    Join Date
    Dec 2006
    Posts
    2,087
    Quote Originally Posted by NiteW4tcher
    where is the best place to start stipping? or does it make no difference.
    ...well, id suggest a strip bar, but im afraid i wont be paying on that night....... ;D
     
     

  3. Re: let it begin (ready for lots HELP!! questions) 
    #3
    Active Member
    Join Date
    Apr 2009
    Posts
    204
    Quote Originally Posted by jonnydangerous
    [quote author=NiteW4tcher link=1317805575/0#0 date=1317805575] where is the best place to start stipping? or does it make no difference.
    ...well, id suggest a strip bar, but im afraid i wont be paying on that night....... ;D[/quote]

    Or you can try in public?
    Might get carted off though!
     
     

  4. Re: let it begin (ready for lots HELP!! questions) 
    #4
    Active Member
    Join Date
    Apr 2009
    Posts
    204
    Or....as the missus says.....
    "Start at the top and work your way down" ;D ;D
     
     

  5. Re: let it begin (ready for lots HELP!! questions) 
    #5
    Senior Member
    Join Date
    May 2010
    Posts
    835
    Quote Originally Posted by Blackandchrome
    Or....as the missus says.....
    "Start at the top and work your way down" ;D ;D
    ;D tails off rear brake assemly off screen off...front mud guard off. then i had a coffee...and now im being roped into work for afternoon lol
     
     

  6. Re: let it begin (ready for lots HELP!! questions) 
    #6
    Platinum Member
    Join Date
    Mar 2011
    Posts
    1,172
    All plastics off, tank & seat (store somewhere safe, indoors in boxes or hung from on top of the garage rafters to stop you treading on them/kicking them across the floor/swearing) carbs and exhaust, wiring unplugged (take photos, you may remember where everything goes now but 3 months later it will all be a mass of strange parts & bolts ), engine out, all other widgets, clocks (take photos), fairing frame(take photos), hang the bike frame from the garage rafters via a ratchet strap & remove the wheels, forks and swingarm.

    ANYTHING that looks even slightly strange of complicated - (take photos) Lots of them.
     
     

  7. Re: let it begin (ready for lots HELP!! questions) 
    #7
    Senior Member
    Join Date
    May 2010
    Posts
    835
    yup photos are being taken of everything the garage has no rafters so gotta create something
     
     

  8. Re: let it begin (ready for lots HELP!! questions) 
    #8
    Senior Member
    Join Date
    May 2010
    Posts
    835
    pics of what im dealing with







     
     

  9. Re: let it begin (ready for lots HELP!! questions) 
    #9
    Platinum Member
    Join Date
    Mar 2011
    Posts
    1,091



    I lol'd xD
     
     

  10. Re: (ready for lots HELP!! questions) now piccys 
    #10
    Senior Member
    Join Date
    May 2010
    Posts
    835
    ;D that wasnt ment to be that 1.....oh well lol
     
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •