Notices
 

Thread: Beastly Bonneville

Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. Beastly Bonneville 
    #1
    Administrator BB's Avatar
    Join Date
    Mar 2006
    Location
    West Wilts
    Posts
    10,356
    Would you believe it the b*stard thing started 1st press when I got back! > It's sat out in the sunshine laughing at me now!

    So, what's wrong with the bonny - apart from it doesn't like misty fine rain but seems fine in proper rain? Any ideas? answers on a post please!! I think its off with the tank and do some checking over of coils etc tomorrow.

    Oh well at least I had a good laugh on my pocket rocket.
    We could learn a lot from crayons; some are sharp, some are pretty, some are dull, while others bright, some have weird names, but they all have learned to live together in the same box.”
     
     

  2. Re: Beastly Bonneville 
    #2
    Diamond Member R1chie's Avatar
    Join Date
    Mar 2006
    Location
    GLOS
    Posts
    3,193
    check for any corrosion on wiring and then wd40 the bugger to the max BB!!!

    Make it idiot proof and someone will make a better idiot.
     
     

  3. Re: Beastly Bonneville 
    #3
    Administrator BB's Avatar
    Join Date
    Mar 2006
    Location
    West Wilts
    Posts
    10,356
    I really hate faults like this, you spend your life waiting for it to re-occur, it puts you off using the damn thing in case it starts to drizzle! Next thing you know you start turning into a fair weather biker!
    We could learn a lot from crayons; some are sharp, some are pretty, some are dull, while others bright, some have weird names, but they all have learned to live together in the same box.”
     
     

  4. Re: Beastly Bonneville 
    #4
    Diamond Member
    Join Date
    Mar 2006
    Posts
    2,610
    Coils and plug HT leads always a good starting point (sic) and can be worse in 'damp' rather than 'wet' conditions. Are there any idiot safety mechanisms such as sidestand cutouts? I doubt it, but it's fresh in my mind as mine kept cutting out the engine yesterday (I bypassed it for todays gathering and then rode off out of the pub carpark with the sidestand down - doh!). Was it dead on both cyclinders this am or just the one?
     
     

  5. Re: Beastly Bonneville 
    #5
    Administrator BB's Avatar
    Join Date
    Mar 2006
    Location
    West Wilts
    Posts
    10,356
    Turning over but not firing on either. When it happened last (the first) time it was firing & would run on one. I checked the kill switch, the side stand switch and every other option possible. Still no go - shoved it up the garden path & left it in the rain & dragged out the Morini. Came back tonight, parked the Morini behind the Bonnie put the key in pressed the button & hey presto running on 2 sweet as a nut!
    We could learn a lot from crayons; some are sharp, some are pretty, some are dull, while others bright, some have weird names, but they all have learned to live together in the same box.”
     
     

  6. Re: Beastly Bonneville 
    #6
    Platinum Member
    Join Date
    Feb 2007
    Posts
    1,179
    LOL typical!!

    Defo sounds like damp getting in somewhere - liberal WD40 as said will help a bit
     
     

  7. Re: Beastly Bonneville 
    #7
    Diamond Member
    Join Date
    Mar 2006
    Posts
    2,610
    I guess you just need to start with the basics and work forwards. The problem as you know is replicating the conditions. If it was me (and all advice/opinions given on the internet are without guarantees and taken at your own risk!!) I would start at the battery and just work forward though the electrics just cleaning everything up along the way. May want to use dielectric grease on electrical contacts (Silicon based) which will work longer than WD40. Doesn't sound like the sidestand cutout if it was running on one cylinder before. Does the Bonnie have a neutral or clutch cutout safety switch as well?
     
     

  8. Re: Beastly Bonneville 
    #8
    Platinum Member
    Join Date
    Feb 2006
    Posts
    1,116
    Give it a Bassle Forte! Remember when his Morris 1100 would'nt start? get a stick, branch or anything and beat the bloody thing >, You HAVE to let them know who's boss ;D.

    You hav'nt got an HT lead breaking down by any chance.
     
     

  9. Re: Beastly Bonneville 
    #9
    Administrator BB's Avatar
    Join Date
    Mar 2006
    Location
    West Wilts
    Posts
    10,356
    I picked up a plant mister yesterday and thought I might try damping various electrical parts with that to see if I can replicate the fault.
    Hope it's dry for Sunday for Bikesafe if I haven't sussed it by then!! or I might have to take the Morini! ;D
    We could learn a lot from crayons; some are sharp, some are pretty, some are dull, while others bright, some have weird names, but they all have learned to live together in the same box.”
     
     

  10. Re: Beastly Bonneville 
    #10
    Diamond Member
    Join Date
    Mar 2006
    Posts
    2,610
    Water and electricity - what a combination!
     
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •