hi all
can anyone help me as me gixer is running rich
and cant work out how or were screw is to turn petrol flow down
thanks all [smiley=lolk.gif]
|
hi all
can anyone help me as me gixer is running rich
and cant work out how or were screw is to turn petrol flow down
thanks all [smiley=lolk.gif]
where abouts is it running rich?
idle, progression, quarter throttle to three quarter or flat out?
you will need to alter a different circuit for each of the above, careful though as there is a MASSIVE effect on needle and jet changes on the GSXR11 at about three quarter throttle.
has someone fitted a dynojet kit then returned it to standard airbox? changed exhausts recently?, what condition is the air filter? have you adjusted the valves recently? plugs cleaned and gapped/replaced?
lots of questions.........neeeeeeeeeed more info.
idle mixture screw is under the carb, close to the inlet manifold, infront of the float bowl...
hi
when i start the bike you can smell petrol from the micron race can not sure if this is normal when i start riding she seems to calm down so its really when i start her and idle
thanks for reply
absolutely nothing to worry about, give it a good run to clear it out every now and then, and a GOOD service by someone who knows what theyre doing with "old-skool" and youll be well away :-)
Would suspect a sticking float. If it's run fine until now. It's not the settings.
also how rich?? Drips fuel, or a puff of black smoke?? As JD, need more info.
hi jaydee
thanks for the help much appreciated
and thank you for speedy responce to this question
hi jon
no smoke or nout just smeel of petrol when started and idle from race can
As JD says. Nowt to worry about. Just a bit of a rich starter....
« Previous Thread | Next Thread » |