Probably a stupid question but my bike is due for its MOT (booked in monday) and the switch to turn on high beams has stopped working, do I need this to pass my MOT as the trigger used to flash morons still works
|
Probably a stupid question but my bike is due for its MOT (booked in monday) and the switch to turn on high beams has stopped working, do I need this to pass my MOT as the trigger used to flash morons still works
Er, yes you do need a functioning main beam, not just a flash facility. You're certain that the flash still works, the main beam filament hasn't blown?
As far as I know if you have the lights they have to work, but I could be wrong.
Yep, if it's fitted, it has to work...
Yes as scotty says if fitted it must work [smiley=thumbsup.gif]
Yeah the filament is fine at the trigger flash all works fine, it must just be a dodgy connection in the switch, will have to take it apart sunday and see if I can find where the problem isOriginally Posted by Scotty
Sounds like either a dodgy Switch or a bad connection.
The only way round lights, is the daylight MoT.
Easier to fix the switch than remove all the lights! ;DOriginally Posted by Jon_W
BB
What about the other way around? My full beam works but the flash switch must be gone! Will it pass?? :-/
« Previous Thread | Next Thread » |