Notices
 

Thread: Carb advice

Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. Carb advice 
    #1
    Platinum Member
    Join Date
    Mar 2016
    Posts
    1,109
    I’m trying to set up up the air/fuel mix on a carb which arrived in bits, in the manual it says this: The factory position for most air fuel mixture screws is usually between 1.5 and 2.5 turns out from being screwed all the way in. If you ever want to start fresh, turn the screw clockwise until it is lightly seated, then back it out about 2 turns. Then you can make adjustments from this position.[9]
    my question is when it says “turns” does that mean a full 360 turn of the screw or a turn of the wrist which would be a 180 turn of the screw, any help would be appreciated.
     
     

  2.  
    #2
    Chatterbox
    Join Date
    Nov 2008
    Posts
    5,854
    I’d assume a full turn as being a 360 rotation Bagde.
    What bike is it ?
    & good luck
    Everything else is shyte
     
     

  3.  
    #3
    Platinum Member
    Join Date
    Mar 2016
    Posts
    1,109
    It’s on my volusia 800, the original carb had a crack so brought this one and rebuilt it but the bike now runs like crap spluttering once it gets up to speed. Cheers
     
     

  4.  
    #4
    Diamond Member DC's Avatar
    Join Date
    Jul 2011
    Location
    Earth
    Posts
    2,867
    As LT says one full turn is one complete rotation of the screw .
     
     

  5.  
    #5
    Platinum Member
    Join Date
    Mar 2016
    Posts
    1,109
    Quote Originally Posted by DC View Post
    As LT says one full turn is one complete rotation of the screw .
    Cheers, il give that a ago and keep my fingers and toes crossed.
     
     

  6.  
    #6
    Chatterbox
    Join Date
    Nov 2008
    Posts
    5,854
    Quote Originally Posted by Badger-Roy View Post
    It’s on my volusia 800, the original carb had a crack so brought this one and rebuilt it but the bike now runs like crap spluttering once it gets up to speed. Cheers
    Bummer

    Jets all nice & clean & seated nicely ?
    Air leaks on carb or intake seals ?
    Everything else is shyte
     
     

  7.  
    #7
    Platinum Member
    Join Date
    Mar 2016
    Posts
    1,109
    Quote Originally Posted by Last Train View Post
    Bummer

    Jets all nice & clean & seated nicely ?
    Air leaks on carb or intake seals ?
    Yeah jets all good and can’t find any leaks etc, it runs perfect on tick over and low speed up to 60 but over that it splutters.
     
     

  8.  
    #8
    Senior Member Trev_P's Avatar
    Join Date
    Sep 2017
    Location
    RWB
    Posts
    675
    if it has a fuel pump check it for pressure or it could be the float level is wrong/hole in float so that it starves the bowl of fuel above 60
    If Voting Made a Difference, They Wouldn’t Let Us Do It

     
     

  9.  
    #9
    Diamond Member Burbler's Avatar
    Join Date
    Mar 2014
    Location
    Brizzle
    Posts
    2,711
    Try Dettol and a wire brush - worked for me.
    I only have one vice…I lie.
     
     

  10.  
    #10
    Senior Member Trev_P's Avatar
    Join Date
    Sep 2017
    Location
    RWB
    Posts
    675
    Quote Originally Posted by Burbler View Post
    Try Dettol and a wire brush - worked for me.
    Klingons ??l
    If Voting Made a Difference, They Wouldn’t Let Us Do It

     
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •