Notices
 

Thread: Gasket removal .

Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Hybrid View

  1. Gasket removal . 
    #1
    Diamond Member DC's Avatar
    Join Date
    Jul 2011
    Location
    Earth
    Posts
    2,867
    I'm supposed to be in the garage trying to remove the old gasket from the alternator cover , but it's mind numbingly soul destroying . Tips and tricks for softening and removing baked and brittle gasket , any offers ?
     
     

  2.  
    #2
    Platinum Member
    Join Date
    Mar 2016
    Posts
    1,109
    Quote Originally Posted by Daddy Cool View Post
    I'm supposed to be in the garage trying to remove the old gasket from the alternator cover , but it's mind numbingly soul destroying . Tips and tricks for softening and removing baked and brittle gasket , any offers ?
    Iv had some success using a nylon drill attachment before, I once used a chemical (can't remember the name) which worked but it marked the engine horribly where it run down. Scotchbrite pads work pretty well.
     
     

  3.  
    #3
    Diamond Member DC's Avatar
    Join Date
    Jul 2011
    Location
    Earth
    Posts
    2,867
    Cheers Roy , I've got scotchbrite pads etc , I was hoping it would just miraculously lift off I'm putting it off cos it'c a tad chilly in there and not really the place to be crawling around on my hands and knees . I think sitting here in the warm in front of the laptop doing bugger all is a much better use of my time .
     
     

  4.  
    #4
    Diamond Member Burbler's Avatar
    Join Date
    Mar 2014
    Location
    Brizzle
    Posts
    2,711
    Wood chisel and hammer works.
    I only have one viceā€¦I lie.
     
     

  5.  
    #5
    Diamond Member Wes's Avatar
    Join Date
    Sep 2011
    Location
    Bristol
    Posts
    2,908
    Its a bit of a nightmare to get off, I think I used a flat bladed craft knife to get as much as I could removed
     
     

  6.  
    #6
    Chatterbox
    Join Date
    Nov 2008
    Posts
    5,854
    One of life’s great ‘pig of a job’ that.
    Everything else is shyte
     
     

  7.  
    #7
    Diamond Member DC's Avatar
    Join Date
    Jul 2011
    Location
    Earth
    Posts
    2,867
    Cheers chaps , yep , absolute pig of a job , about as satisfying as removing wallpaper with a toothbrush ! Job Done , Stanley blade and scotchbrite pad . I don't know why they don't use rubber gaskets . It's used on the cam cover , a smear of oil on each side and on removal it just peels away .
     
     

  8.  
    #8
    Platinum Member
    Join Date
    Mar 2010
    Location
    Hiding in your blindspot
    Posts
    1,687
    I have an old metal ruler for such tasks.
     
     

  9.  
    #9
    Diamond Member DC's Avatar
    Join Date
    Jul 2011
    Location
    Earth
    Posts
    2,867
    Quote Originally Posted by Mitch9128 View Post
    I have an old metal ruler for such tasks.
     
     

  10.  
    #10
    Senior Member
    Join Date
    Aug 2012
    Location
    bromham and melksham
    Posts
    596
    been in France for a few days.
    couple of things I use are a long flat blade so as to keep the possibility of hollowing an area of the face.
    sometimes meths works otherwise Loctite do a product called 'gasket remover' aerosol cans but expensive.
     
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •