https://www.facebook.com/photo.php?v...43094644704785
cleaned clutch plates up. installed them dry and the clutch worked fine.
took apart again and reassembled the plates with some fresh oil on (castrol power 1 10w40 same oil i always use)
soon as i started putting plates back on i could feel it binding.....even with no pressure springs in. clutch springs back in at 10nm torque (per haynes).
pull lever in ....1st gear...back wheel is very hard to spin.
so cleaned plates again and took above video....as of now thats how i left it.
it has to be funny plates? why im at a loss
