Notices
 

Thread: Seized Engine Bolt

Results 1 to 3 of 3
  1. Seized Engine Bolt 
    #1
    I am currently in the process of removing my engine and the main supporting engine bolt which also supports the suspension, I believe, has seized and all I have gained from trying to loosen it is a bent t-bar!!!
    I believe this is because it is an aluminium crankcase and a steel bolt.
    Does anone have any tips for releasing it.
    Thanks
    Joe
     
     

  2. Re: Seized Engine Bolt 
    #2
    Senior Member b_1_rd's Avatar
    Join Date
    Apr 2006
    Posts
    962
    Give it a real good soaking in WD40, leave it as long as overnight then try it with as long a wrench as possible but be careful not to shear it off. Sometimes it's worth trying to tighten it (clockwise) ever so slightly before releasing it (anti-clockwise). Doesn't always work though.

    P.S. I take no responsibility for action which may shear the bolt!
    Steve

    you make me dizzy running circles in my head
    www.speedsnap.co.uk
     
     

  3. Re: Seized Engine Bolt 
    #3
    Diamond Member
    Join Date
    Mar 2006
    Posts
    2,610
    As for b_1_rd but you could also give the head of the bolt a good sharp tap with a 3lb hammer which can help break the corrosion around the thread seal before you try and undo it. Also make sure the wrench is a really good fit otherwise you will round off the bolt and be in more trouble. Good luck!
     
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •