|
|
23-01-09, 03:00 PM
Nothing is ever easy >
Got a CDI took it to shop to fit,and they say its the wrong bit i need ffs
its a fuse and chip box that i should of got ,,arguing the toss with him and saying thats wot he told me to get ,
so im at the point of re ordering this new item , :-/
25-01-09, 03:09 PM
Whats the latest with your bike Jack?
25-01-09, 04:35 PM
Check the Starter relay
is it like this http://www.te-motorcyclespares.co.uk...roductID=13418
its similar to the one on my bike and they rot inside as i found out !causes all sorts of problems as it powers the starter, from the block connector the cdi unit and few other things some parts work others dont
25-01-09, 05:01 PM
Cheers Alan will have a look at it when im back at the shop,,
At the mo im just waiting for the fuse box relay to come in the post :-?
25-01-09, 08:18 PM
If it is like that the wire + from battery goes into the inside of the relay and corrodes there might be a sign of blue powder around the + terminal,that wire connects to one side of the 30amp fuse which also connects to 2 spades the other side of the fuse then connects to the other 2 spade connectors .
im fairly sure the four spades connect the Cdi, R/R, Ign switch etc. but dont quote me on that!
The relay on my bike was corroded when i took it apart bits inside broke off so had to do a solder job to get bike going iv now ordered a new one.
Good luck !
25-01-09, 11:20 PM
Cheers
29-01-09, 11:01 AM
still not on the road ,waiting for bits
30-01-09, 06:23 AM
They must be being delivered by pigeon post, cus they seem to be taking a while!! ;D >
30-01-09, 03:48 PM
Yup, got them today
We have a spark,just waiting for the call to say its ok or not :-/
30-01-09, 05:02 PM
Whooooo thats me back on the road all working,ho's up for a ride tomoz
| « Previous Thread | Next Thread » |
