Notices
 

Thread: Started then Didnt start

Page 4 of 6 FirstFirst ... 23456 LastLast
Results 31 to 40 of 59
  1. Re: Started then Didnt start 
    #31
    Platinum Member
    Join Date
    Jul 2008
    Posts
    1,081
    jack not to clued up on the modern bikes but iam sure its not a £500 problem probably a loose conection or some wet got in the ignition system somewhere was raining when you road home try this link it may help http://www.kawasakimotorcycle.org/fo...ont-spark.html wrong link try this one ;D
     
     

  2. Re: Started then Didnt start 
    #32
    Platinum Member jack930's Avatar
    Join Date
    Oct 2008
    Location
    Westbury
    Posts
    1,294
    Ok any one know about bike electrics , that could help and test lol

    Ps thanks Thunderbird
    There are 2 new posts since your last visit. (You have read 3 of these posts.)
     
     

  3. Re: Started then Didnt start 
    #33
    Platinum Member
    Join Date
    Jul 2008
    Posts
    1,108
    Check the coil pack, like thunderbird said probably got affected by the rain
     
     

  4. Re: Started then Didnt start 
    #34
    Platinum Member jack930's Avatar
    Join Date
    Oct 2008
    Location
    Westbury
    Posts
    1,294
    someone posted this on ninja forum

    No spark to any plug rules out coils, leads, plugs.
    As it turns over that rules out kill switch, clutch switch, sidestand switch.
    That leaves ignition pickup (rh end of crank) CDI or wiring somewhere.
    Check connectors to RH switches, ignition pickup, CDI and ignition switch
    Check Oil pressure light and neutral light are on as they are fed off same fuse

    All lights work ..
    There are 2 new posts since your last visit. (You have read 3 of these posts.)
     
     

  5. Re: Started then Didnt start 
    #35
    Platinum Member
    Join Date
    Jul 2008
    Posts
    1,081
    based on the info you have posted i would look at the ignition pick ups i think they are refering to them as the igniters in the link i posted,do you have a manual for the bike jack if you dont have a multimeter just go through all the conectors and check they are nice and firm and free from corrosion also look for any splits or cracks in the wires insulation
     
     

  6. Re: Started then Didnt start 
    #36
    Platinum Member jack930's Avatar
    Join Date
    Oct 2008
    Location
    Westbury
    Posts
    1,294
    no m8 :-[
    There are 2 new posts since your last visit. (You have read 3 of these posts.)
     
     

  7. Re: Started then Didnt start 
    #37
    Platinum Member jack930's Avatar
    Join Date
    Oct 2008
    Location
    Westbury
    Posts
    1,294
    Right, from the shop telling me i need a CDI unit and him telling me it would cost £100-150,

    I have got it myself all for the sum of £40

    So if i need any other bits ,i think im gona do the work myself and get them at half the price he is giving me :-?
    There are 2 new posts since your last visit. (You have read 3 of these posts.)
     
     

  8. Re: Started then Didnt start 
    #38
    Platinum Member
    Join Date
    Jul 2008
    Posts
    1,081
    lets hope its only the cdi then jack £40 sounds alot better than £500
     
     

  9. Re: Started then Didnt start 
    #39
    Platinum Member jack930's Avatar
    Join Date
    Oct 2008
    Location
    Westbury
    Posts
    1,294
    Yup,if it works tomoz could be at the sally tomoz night :-? or is that wishfull thinking
    There are 2 new posts since your last visit. (You have read 3 of these posts.)
     
     

  10. Re: Started then Didnt start 
    #40
    Active Member mikesouthby's Avatar
    Join Date
    Jan 2009
    Posts
    396
    Fingers crossed!
     
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •