cbr 1000 f (the old one !)

[8_ball]

Hi guys
picked up a non runner, no spark.
power to lights horn and things but no power to coils.
cdi is ok and the fuses all ok. ????
its a mass of wires and hope that someone has came across or knows any known issues with these battle ships ...lol ;D
cheers

[@bj]

8 ball...

Are you a pool player..?

[Jon_W]

Is there a signal to the cdi?? Is there power on the cdi?? You say the cdi is ok, have you tested it??

[8_ball]

yeap the cdi has been tried on a working bike and is ok ?
and no im not a pool player, just have 8 balls ???? :P

[jonneyflame]

Does it have HISS? (Honda Ignition Security System) if so you need the corresponding key, they were put on around 2000, a real bugger if its broken or the wrong key, i had a cbr 600 f4 with the same problem and ended up having to buy a new ecu (honda wont/cant even sell you a new key/chip), that bike had the same symptoms as your after someone had hotwired the wiring loom

[470four]

Too early for the HISS methinks?


Can you swap parts between yours and the working bike until it works?

[470four]

I think these have a separate 10A fuse for the ignition / starter as per the CBR6, this is fine, yes?

The Big Green Fuse on the starter solenoid hasnt done this??

[8_ball]

I think these have a separate 10A fuse for the ignition / starter as per the CBR6, this is fine, yes?

The Big Green Fuse on the starter solenoid hasnt done this??

no nothing that straight forward, lol. no alarms . fuses are all cool and unfortunatly Im not able to use the other bike for swapping stuff ,,,bummer :-*

[8_ball]

problem solved .............the fuel relay is also in line with the coils and it was the cause of all the problems fires up d runs fine now ........cool
time to start cutting it up ........ ;D

[Mark_Able]

Matt Black??? ;D