http://www.performancemotorcare.com/...eting_Gel.html
To save a fortune on gasket sets could I get this instead?
Never even heard of the gel!
|
|
17-05-12, 10:54 AM
http://www.performancemotorcare.com/...eting_Gel.html
To save a fortune on gasket sets could I get this instead?
Never even heard of the gel!
17-05-12, 10:55 AM
Trying to save money in this way could end in tears and a lot more work in the long run? :
17-05-12, 10:59 AM
Im guessing that you are not 100% on if its affective and reliable then?
Gasket set for my thundercat is £120!
17-05-12, 11:03 AM
Use the gaskets.
The bike has been toleranced with the gaskets.
17-05-12, 11:08 AM
Use the right gasket for the job. I only use sealant where its specified by the manufacturer and its usually in conjunction with a gasket anyway.
17-05-12, 12:12 PM
Cheers chaps, will go with the gaskets then.
GEAR, 3RD PINION (22T) £146 ..
GEAR, 4TH WHEEL (28T) £90
Starter crankcase gasket £7.60
Clutch crankcase gasket £12.20
Cyclinder Gasket £14.10
Headcover gasket is still looking good.
Cylinder head gasket £37.30
Water pump gasket £0.60
Sump Gasket £11.50
Total £320.81 posted
Oil filter £6
Spark plugs £22.50
Oil 4litres 10/40 £25
Coolant 3litres £21
Total £74.50
Cant find the gasket for the main crankcase, if there is one?
http://www.yamahamotorcyclespares.co...;uid=577647336
£395.31
18-05-12, 06:57 PM
Surly you can look for cheaper sets than from origonal yamaha? and i do see what your saying its nearly half the price of what the bikes worth to rebuild.
21-05-12, 09:40 AM
havnt found any other gaskets! Will have to buy the individual ones, comes at about £70 total, ordered the replacemnt transmission from USA, old fz600 transmission appears in good nick.
21-05-12, 10:32 AM
have a look on wemoto, they usually carry a lot of pattern spares etc
21-05-12, 08:08 PM
wemoto very very good
| « Previous Thread | Next Thread » |
