Replacing front discs today snapped two bolts taking the old ones off >:( :'(is there a company that can put helicoils in,around the Trowbridge Melksham ares and roughly how much it would be approx.Sooner the better.
Printable View
Replacing front discs today snapped two bolts taking the old ones off >:( :'(is there a company that can put helicoils in,around the Trowbridge Melksham ares and roughly how much it would be approx.Sooner the better.
Lightning Services, Hilperton Marsh Farm.
http://www.motorcyclesbath.co.uk/#/e...ing/4545267141
Probably closed until Tuesday, though.......
Did they snap off flush, flat & level or slanted? Helicoils are easy enough to fit, getting the old bolt out is the hard bit... should be easy enough with an easy-out now that the head is gone & the tension is off the threads? :)
No they snapped about 2mm inside the thread,ill try Lightning Services,i think being bolts for holding the disc to the wheel i think the problem is Loctite being on the thread plus rubbish metal the bolts are made of.
A great shop, highly recommended 8-)Quote:
Originally Posted by alanTDM
Alan
Might be worth asking in GM Stevens aswell :) As they have a machine shop on site, they may well do something up there :-/
I did phone them but they said they couldn't do it which i thought was a bit strange seeing as they have got a machine shopQuote:
Originally Posted by silly_simon
They do mouldings and small components, so no set up for maintenance.
What size thread is it??
The size is M8 in the PDF Service manual i got,Paid £10.72 for 12 of them at Fowlers.Quote:
Originally Posted by Jon_W
I drilled down the centre of one but still wont budge >:(
When I had the exhuast studs that needed drilling out I got hold of a gent in Calne that came out to me and did the work, he was great name of Mark Dunsmore on 07725 665324