My 2005 R6 will not start, the thing I have noticed is it does not seem to make the priming noise when you first turn the key.
Printable View
My 2005 R6 will not start, the thing I have noticed is it does not seem to make the priming noise when you first turn the key.
does it try to start ? if so it could be your fuel pump not working
The throttle position sensor will might need to be reset/repaired ?? http://www.r6live.com/r6-how-guides/...on-sensor.html
Do you have a alarm good battry more info is needed (for me to look up on net and copy and paste:rolleyes:) lol but not at your bike......heres a you tube vid just read comments see if that helps
http://m.youtube.com/watch?v=Z0RxIYq...%3DZ0RxIYqL8aQ
Re: R6 99 how to test fuel pump????You hook up the power and ground to the*fuel*pump*and it should run, continuously as long as it has power and ground. If fuel flows, it's good. If it runs without your supplied power and ground, you've got a short somewhere. Not sure if I understand correctly, but hopefully that helps some (got this from a form too could be dangers) sorry its for A 99 yours is 06 and cant undo or spell deliteQuote:
Originally Posted by Brizzer
Fuel pump is where i'd start. You'll need to get a volt meter on the pump and see if it gets a signal. If it does then the pump is faulty, if not then the fault is elsewhere.
Are all the cut off switches ok?
This is when you wish you were a bit more practicable, im not. Hoe do I test the fuel pump?
you tube is your friend http://www.youtube.com/watch?v=wUkcA_u22hE
I dont think there is power supply at the pump?????
Have you checked the fuses? Do you have lights / indicators?
Yes the only thing that does not seem to have power is the fuel pump?
Fuse maybe...
Checked the fuses all o/k, how do I check the relay ?????
You need a voltimeter i wish i said this earlyer call r.a.c or AA a relay would be something they could test if its gone there would been a short circit somewherewhich could blow a new one you need a profesional machanic to fix it hope they dont charge you too much good luckQuote:
Originally Posted by goz1960
I think you have a Fuel pump relay on that bike check that, if that's Kaput no power to the pump
Ooops missed your post about checking relay,if your lucky you might have a separate fuel pump relay,some Yamaha's have it combined with the Starter Circuit Cut off Relay with the F/Pump relay combined with separate connector,or it's a All in One block connector.Wiring diagram is your best bet for that info or a Haynes manual.
You have checked your Kill switch is in the run position?
Called out R.A.C home start, might as well called out an ambulance for the good they were. going for the cheap options first (relay) to start.
Still not running anyone know where I can get the issue diagnosed without it costing a fortune???.
[QUOTE=goz1960;460818]Still not running anyone know where I can get the issue diagnosed without it costing a fortune???.[/QU
were you from ? if your from Swindon area you could try Gary Vardy
Goz ring me :-)
Mikkie 07792709590